PC-3000 MULTI-PARAMETER PATIENT MONITOR
PC 3000 Multi Parameter Patient Monitor:
- 7'' high resolution colour TFT display, 5-channel waveform display
- Standard parameters: ECG, RESP, Sp02, NIBP, 2-TEMP, PR, Arrhythmia and ST segment analysis
- Up to 800 groups parameter data & 24-hour ECG waveform storage and recall
- 480-hour graphic and tubular trends for all parameters
- 7 channels ECG simultaneous waveforms display
- Protection against interference from defibrillator, electrosurgical knife
- Adult/Pediatric measurement modes
- Visual and audible alarms; networking capability
Catalog
- 7'' high resolution colour TFT display, 5-channel waveform display
- Standard parameters: ECG, RESP, Sp02, NIBP, 2-TEMP, PR, Arrhythmia and ST segment analysis
- Up to 800 groups parameter data & 24-hour ECG waveform storage and recall
- 480-hour graphic and tubular trends for all parameters
- 7 channels ECG simultaneous waveforms display
- Protection against interference from defibrillator, electrosurgical knife
- Adult/Pediatric measurement modes
- Visual and audible alarms; networking capability
Catalog
- Product code: 35134
- Units: 1 pc.
- Specifications:
NIBP Monitoring
• Measuring method: Automatic measurement by oscillating method
• Cuff inflation time: <10 seconds (typical adult cuff)
• Initial cuff inflation pressure: Adult mode: <180mmHg infant mode: <120mmHg
• Overpressure protection limit: Adult mode: 300mmHg Infant mode: 240 mmHg
Measuring range
• Systolic pressure: Adult: 40-225 mmHg Infant: 40-200 mmHg
• Diastolic pressure: Adult: 20-215 mmHg Infant: 20-165 mmHg
• Mean arterial pressure: Adult: 10-195 mmHg Infant: 10-150 mmHg
• Measurement accuracy: Systolic ±10% Diastolic ±10% MAP ±10%
• Measurement mode: Manual, Auto, STAT
• Automatic measuring: 1~240min
• Intervals: interval tolerance: <10s
TEMP Monitoring
• Measuring range, accuracy: 25.0°C~45.0°C, ±0.2°C
SpO2 & Pulse Rate Monitoring
• Transducer: dual-wave length LED
• SpO2 measuring range: 35%~100%
• Low perfusion capability: 0.4%~5%
• SpO2 display accuracy: 70%~100% ±3%
• PR measuring range: 30bpm~250bpm
• PR measuring accuracy: ±2bpm
ECG Monitoring
• Heart rate measurement: ±0.4mVp~±5mVp
• Heart rate display range: 20bpm~250bpm
• Display accuracy*: ±1% or ± 2 bpm, whichever is greater
• Heart rate alarm delay time: =10s
• Sensitivity selection: Auto, ×1/2, ×1, ×2, ×4 tolerance: =5%
• Sweeping speed: 12.5 mm/s, 25mm/s, 50mm/s tolerance: =10%
• ECG noise level: =30µVP-P
• ECG input loop current: =0.1µA
• Input impedance: =5MO
• Common-mode rejection ratio: =89dB
• Time constant: Monitoring mode=0.3s
• Diagnostic mode=3.2s
• Frequency response: Monitoring mode: 0.5Hz~25Hz
• Diagnostic mode: 0.05Hz~75Hz
RESP Monitoring
• Monitoring range, accuracy: 0rpm~120rpm, ±5% or 2rpm, whichever is greater
• RESP alarm range: 0bpm~100bpm
• Alarm tolerance: ±10%
Other Technical Specifications
• Power supply: 100~250Vac, 50/60Hz
• Power consumption: <80 VA
• Display mode: 7 inches TFT color LCD
• Alarming mode: Audible-visual alarm
• Networking port: LCD serial/Net port